S-Series Keyed Lever Locks

Light and Medium Duty Commercial Keyed Lock Lever

S-Series Keyed Lever Lock Full Line Catalog

Schlage's S-Series locks provide reliable, cost-effective performance for entrance doors and interior passages where heavy duty levers may not be required. This keyed lever lock is especially designed for both light/medium commercial and multi-housing applications. It features heat-treated steel locking components for extra strength. Two independent heavy duty torsion springs add durability and long life.

Available in numerous keyed and non-keyed functions, the S-Series is produced in the most popular finishes and is compatible with the Schlage family of ADA-approved lever products. It is UL Listed for all functions and fits a standard door preparation.

• Specifications
• Standard Features
• Finishes
• Door Preparation
• Designs
• Documentation

Specifications

• Applications: Interior light to medium duty commercial doors: office tenant, laboratories, passage and entrance doors. Heavy duty residential doors: single and multi-family housing.
  
  
• Certifications: ANSI A156.2, 1996, Series 4000 Grade 2. UL Listed for all functions up to 3-hour doors
  
  
• Exposed Trim: Levers are pressure cast zinc, plated to match finishes indicated. Roses, latch faceplates, and strikes are wrought brass or bronze.
  
  
• Keying: 6-Pin tumbler with two nickel silver keys per lock. Other keying options available from the factory include master keying, grand master keying, construction keying, and interchangeable core. Classic Primus® and Everest® Primus® are also available.
  
  
• Door Range: 1 3/8" - 2" (35 mm - 51mm), except S40D: 1 3/8" - 1 7/8" (35 mm - 48 mm).
  
  
• Backset: Universal backset latches standard, fit either 2 3/8" (60 mm) or 2 ¾" (70 mm) backsets. 5" (127 mm) backset latches available.
  
  
• Deadlatches: 1" x 2 ¼" (25 mm x 57 mm), square corner faceplate, 7/8" (23 mm) housing, ½" (13 mm) throw. Latches are furnished in brass, bronze or chrome finishes compatible with lock trim. Orders for complete locks are provided with a G506-815 sleeve for latches installed in doors with 1" (25 mm) edge bore.
  
  
• Strikes: Square corner, 1 1/8" x 2 ¼" x 3/32" (29 mm x 57 mm x 2 mm) T strike with 1 1/8" (29 mm) lip, furnished with dust box, #10-001 is standard. Optional lip lengths 1 " though 2" (25 mm - 51 mm) ¼" (6 mm) radius round corner strikes and ANSI 1 ¼" x 4 7/8" (32 mm x 124 mm) strikes are also available.

Back to Top

Standard Features

• Exceeds 400,000 cycle ANSI Grade 2 requirements
• Interlocking chassis and latchbolt
• Snap-On inside rose conceals mounting screws
• Key removable outside lever for quick and easy cylinder replacement

Back to Top

Finishes

Back to Top

Door Preparation

Back to Top

Designs

Jupiter 625	Neptune 625
Saturn 626	Flair 605

Back to Top

Documentation

• Spec sheet
• Installation instructions
• Templates

Back to Top