|
Product Catalog/Templates
 H-Series
Interconnected Entrance Locks
Residential and Commercial
Interconnected Entrance Locks
Interconnected H-Series locks combine the security
of a Schlage 1" throw deadbolt with the convenience
of an A-Series cylindrical lock. A turn of the
inside knob or lever simultaneously retracts both
bolt and latch, allowing a panic-proof exit in
an emergency. The door frame reinforcer, furnished
with standard deadbolts, significantly strengthens
a wood doorjamb against "kick-in" attacks.
It is an ideal residential security lock for
single and multi-family dwellings, used equally
well in light commercial applications.
Specifications
- Applications: An ideal entrance lock that
is well suited for single and multi-family residential
dwellings as well as commercial applications.
The interconnected H-Series provides the security
of deadbolt locking with the ease and convenience
of a standard cylindrical chassis. The lock
features simultaneous retraction of both the
latch and the deadbolt from the inside by turning
the knob/lever, providing panic-proof exiting.
- Exposed Trim: Knobs and inside escutcheon
are wrought brass or bronze. Wrought brass or
bronze trim rings. Levers are zinc-based plated
to match finishes indicated.
- Keying: 6-Pin tumbler with two nickel silver
keys per lock. 5-Pin keying available. Other
keying options available from the factory include
master keying, grand master keying, construction
keying, and interchangeable cores. Classic Primus®
and Everest Primus® are also available.
- Door Range: 1 3/8" - 1 ¾"
(35 mm - 44 mm) standard. Also available for
doors up to 2 ¼" (57 mm). Specify
door thickness when ordering H-Series locks
for other than standard door thicknesses.
- Backset: 2 3/8" (60 mm) standard, 2 ¾"
(70 mm) and 5" (127 mm) available.
- Door Frame Reinforcer (37-016): Furnished
with standard deadbolts. This unique device
significantly strengthens a wood doorjamb against
"kick-in" attack and greatly increases
the security effectiveness of the lock. The
reinforcer is concealed under the strike and
is anchored to the jamb with two 3" (76
mm) long screws.
Back to Top
Latches
and Strikes
- Latches: 1" x 2 ¼" (25 mm
x 57 mm), ½" (13 mm) throw, A-Series
latches with 7/8" (22 mm) housings standard.
All A-Series latches available.
- Strikes: Furnished with standard BC100-Series
deadbolts with concealed hardened steel rollers,
1" x 2 ¼" (25 mm x 57 mm) faceplates,
and 7/8" (22 mm) housings standard. All
BC100-Series deadbolts available.
Back to Top
Door
Preparation
Back to Top
Designs
| Orbit 626 |
Plymouth 626 |
Levon
613 |
Meteor
Outside Trim Escutcheon |
 |
 |
 |
 |
Back to Top
Finishes
Back to Top
Documentation
Back to Top
|
